3D and transparent data (the moving image passes through the time etc).
Power ring at the bottom, weather at the top.
Looks much nicer on the watch than the pictures.
Download: http://bit.ly/2EfhyVB
Credit: https://giphy.com/
3D and transparent data (the moving image passes through the time etc).
Power ring at the bottom, weather at the top.
Looks much nicer on the watch than the pictures.
Download: http://bit.ly/2EfhyVB
Credit: https://giphy.com/
made my lem x goes on a loop , not working , any admin can test this , so we can know if it was my watch fault or the skin itself .
@Aziz_noufid Orā¦ you could read the section this was posted on, which says āFaces for Universal Launcherā. But I can be wrong, and you did read it, you have Universal Launcher installed and active and it STILL gave you the loopā¦
@Marco_Ferreira thank you for your input , ofc i have UL , who uses default launcher anyway , but honestly on UL i only get black screen , on default launcher i got the loop, and since you did post, its mean the skin its fine ,and its my watch fault , ill try again , thanks :).
@Aziz_noufid Sorry to hear youāre having trouble with the face mate. It does take a moment to āactivateā the face on UL, I assume due to the animation. I find pushing the screen off/on button a few times helps. Once loaded itās not a problem. If anyone is willing to try it on their LEMX id appreciate it - and if they say itās causing issues Iāll update the post warning other users. Thank you for the feedback.
@Aziz_noufid it does work on my watch, but I donāt have a lem xā¦ It takes a while until it starts showing the watch (many images to load to memory)ā¦
Work well on my i4 air, thank you so much for this beautiful watchface
Best watchface animation. 5*. More of that kind
@sFa_MHP Iām not trying to steal the thread, but since you asked, Iāve done an animated one back in August. https://plus.google.com/u/0/+MarcoFerreira1976/posts/YQx6ENFi8iQ
So niceā¦ looks amazing in the dark.
It freezes and reboots on the KW99ā¦what do I do?..
Greetings !
i installed this watch face by accident as i thought it was a stock launcher face, however its*** only actually for universal launcher *** which i didnt have installed. but the watch is now in a boot loop (since it always stays in āpreparingā) and i cant uninstall this face or get into the operating system. anyone know how to remove it or get into the USB debugging so i can delete it off the watch???
please help
thanks in advance
kospet optimus pro
stock launcher
3gb ram 32gb rom
If you had enabled USB debugging in settings before,then you can install universal launcher through advance on the device,the choose universal launcher as default launcher then your watch will start,then just clear the data of āwatchā app in uninstall apps setting,then you can use stock launcher again.
thank you so much for your insight, the tactic used to recover is as follows below:
http://bbs.kospet.com/forum.php?mod=viewthread&tid=38&extra=&page=1
Software tools & firmware:
Please download:
Tutorial OF Flash ROM: Tutorial.pdf
Flash Tool: SP_Flash_Tool_exe_Windows_v5.1804.00.001.zip
USB Driverļ¼MTK_USB_Driver_exe_v1.1032.0.zip
Firmware: Kospet_Optimus_Pro_V1.6_20190528ļ¼32+3ļ¼.zip
was able to factory reset watch in about 15 minutes using the above steps.
hope this helps the community !
Ya ,i was giving a way to restore the watch without flashing stock firmware
I installed āuniversal launcherā from the play store, but it doesnāt work ā¦ How can I fix it?
You need to be more specific ? When installed you have to " accept " all permissions . Also when asked to accept launcher select " always " . There is no reason why UL wont work . Thanks
There is a video on our YouTube channel how to install it. Itās for an older Version, but the steps are the same.
i very much appreciate your work around solution TheCez, i had attempted it in hopes of not having to flash rom, although was not able to. I had enabled debugging prior through settings, but when connected via usb the watch kept reverting back. Even now as the watch is back to factory reset, i enabled debugging again through settings and still when i plug it in, i have to manually select āfile transferā each time from the notification.
was hoping that debugging mode included file transfer rights automatically, that way could have accessed clockskin folder and deleted skin then restarted the watch.